Armoured 30″ Propane Gas Pigtail POL x W30
£20.95
This armoured 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W30 outlet. It’s the longer armoured pigtail, useful where the cylinder sits further from the regulator and you still want the extra protection.
The armoured outer layer guards the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors. It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve, and every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
10 in stock
Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.
You may also like…
A pigtail is the short high pressure hose that links a gas cylinder to a regulator or changeover valve, and this armoured 30 inch propane gas pigtail does that with a POL inlet and a W30 outlet. The extra length over the 20 inch version helps where the cylinder stands further from the regulator, and the armoured outer layer protects the hose against general wear, sharp objects and vermin. It’s squirrel proof, so it’s built for cylinders sited outdoors.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst pressure, made for the cylinder side of the system. It comes fitted with a full non-return and excess flow valve, designed to cut the gas flow if there’s a sudden loss of pressure downstream, and every hose carries a self-adhesive advisory label.
On a two or four cylinder setup, pigtails like this connect each bottle to the changeover valve and upgrade kits. If you need less reach, the armoured 20 inch pigtail is the shorter version of the same hose.
Pigtails should be fitted and inspected by a competent person, following Calor’s own guidance. We deliver across our defined postcode area around Reading, so check your postcode is covered before ordering, or call the yard on 0118 9242888 for help matching the fitting.
FAQs
What’s the difference between the 20″ and 30″ armoured pigtail?
Both are armoured, squirrel-proof high pressure pigtails with the same pressure rating and valve. The difference is length: the 30 inch gives more reach where the cylinder sits further from the regulator or changeover valve. Pick the length that lets the hose run without being pulled tight.
What does “squirrel proof” mean?
The armoured outer layer protects the hose from general wear, sharp objects and vermin, including squirrels chewing it, which is why it’s the version for cylinders kept outdoors. The fitting and pressure rating match the standard pigtail.
Do you deliver gas pigtails to my area?
We deliver across a defined set of postcodes around Reading, Berkshire and into parts of South Oxfordshire and Buckinghamshire. The area is limited, so check your postcode is covered first, or call the yard on 0118 9242888 to confirm.
You must be logged in to post a review.
Reviews
There are no reviews yet.