Calor gas cylinder accessories include a range of essential items such as regulators, hoses, and connectors, designed to ensure safe and efficient gas use. These accessories help control gas flow, enable secure connections to appliances, and are available in various types to suit different cylinder sizes and applications.
This 21mm clip-on butane regulator is the standard fitting for portable butane heaters. It clips straight onto a 21mm valve by hand, with no tools, and an on/off lever lets you see at a glance whether the gas is open or shut.
It’s a low pressure regulator, so it sits between a butane cylinder and the heater and brings the gas down to the working pressure the appliance needs. It’s the right match for Calor butane bottles used with portable heaters, such as the 7kg and 15kg.
Always check the regulator suits your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure what you need.
This 27mm clip-on patio gas regulator is the standard fitting for Calor Patio Gas bottles. Part of the Calor Essentials range, it clips onto the 27mm valve by hand and has an easy on/off lever, so you can see whether the gas is open or shut.
The 27mm clip-on connection is what most modern gas BBQs and patio heaters use, so it’s the regulator to reach for when you’re setting up Patio Gas for outdoor cooking or heating. It brings the propane down to the working pressure your appliance needs.
Check the 27mm fitting matches your bottle and appliance before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This 29mbar screw-on butane regulator is the low pressure regulator made for the Calor 4.5kg butane cylinder. Part of the Calor Essentials range, it screws onto the cylinder valve and brings the butane down to the working pressure your appliance needs.
It’s the screw-on type, so it suits the 4.5kg butane bottle rather than the larger butane cylinders that take a 21mm clip-on regulator. If you’re running a small butane appliance off a 4.5kg bottle, this is usually the fitting you need.
Check the regulator matches your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which regulator suits your setup.
This 37mbar screw-on propane regulator is the standard low pressure regulator for Calor propane cylinders. Part of the Calor Essentials range, it has a standard propane POL connection and works in both domestic and industrial setups, bringing the propane down to the working pressure your appliance needs.
It’s the regulator to pair with the common Calor propane bottles. The 3.9kg, 6kg, 13kg, 19kg and 47kg cylinders all take this 37mbar screw-on fitting, so if you’re running a propane appliance off one of those bottles, this is usually the regulator you need.
Check the regulator suits your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure what you need.
This Campingaz butane regulator is the brand-specific regulator for Campingaz cylinders. It fits the 901, 904 and 907 bottles, and you need it to connect any of those cylinders to your camping stove, lantern or appliance.
A standard butane regulator won’t fit Campingaz cylinders, which is why the brand-specific part is needed. If you’ve a Campingaz 904 or 907 and no regulator, this is the one to add.
Check it suits your cylinder and appliance before use, and follow Campingaz’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This is a 2 metre length of 8mm low pressure gas hose, supplied with two jubilee clips to secure each end. It’s the everyday hose for connecting an LPG appliance to its regulator, the kind of job that comes up on heaters, cookers and BBQs.
The 8mm bore suits low pressure butane and propane setups running off a clip-on or screw-on regulator. The jubilee clips clamp the hose firmly onto the hose tails for a secure fit. For anything other than low pressure use, you’ll want a different hose, so check your appliance and regulator first.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
This 20 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the high pressure link between the bottle and the rest of your gas setup, and it’s commonly used on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
This is a 3 metre length of 4.8mm high pressure gas hose, supplied with two jubilee clips to secure each end. The narrow 4.8mm bore is made for high pressure use with small gas appliances, where a low pressure hose isn’t the right choice.
High pressure hose is rated for the higher pressures found closer to the cylinder, so it suits small appliances and torches that need it. The supplied jubilee clips clamp each end firmly onto the hose tails for a secure fit. It’s important to match the hose to your appliance and connection, so check what yours needs before fitting.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
This is a 30 inch high pressure butane gas hose with a W20 nut, made to fit the Calor 4.5kg butane bottle. It’s the high pressure black hose that runs from the cylinder, the piece you need to connect a 4.5kg butane bottle into your setup.
Because it’s high pressure hose for the cylinder side, it’s matched to the butane bottle’s connection rather than to a low pressure appliance hose. If you’re connecting a 4.5kg butane cylinder, this is the hose and nut combination that fits it.
Check the fitting suits your cylinder and appliance before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
This 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the longer of our standard pigtails, useful where the cylinder sits a bit further from the regulator. It’s the high pressure link between the bottle and the rest of your gas setup, common on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
This armoured 20 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W20 outlet. The armoured outer layer is the difference: it protects the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This armoured 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W30 outlet. It’s the longer armoured pigtail, useful where the cylinder sits further from the regulator and you still want the extra protection.
The armoured outer layer guards the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors. It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve, and every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This Calor armoured LPG 4 cylinder upgrade kit turns a two-cylinder system into a four-cylinder one, so you’ve got more gas on hand and longer between changeovers. It’s built to work with the Calor LPG 2 cylinder automatic changeover kit with OPSO.
The hosing is armoured and squirrel proof, giving extra protection against general wear, sharp objects and vermin, which is worth having where cylinders sit outdoors.
A kit like this should be fitted by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 to check it suits your system.
This Calor LPG 4 cylinder upgrade kit turns a two-cylinder system into a four-cylinder one, giving you more gas on hand and longer between changeovers. It’s made to work with the Calor LPG 2 cylinder automatic changeover kit with OPSO.
It’s the standard, non-armoured version, well suited to cylinders kept indoors or in a sheltered spot. Where bottles sit outside and need protecting from wear or vermin, the armoured version is the one to choose instead.
A kit like this should be fitted by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 to check it suits your system.
The Calor Universal BBQ Hose Kit has everything you need to connect a gas BBQ to a Patio Gas bottle and get cooking. It’s a complete kit, so you’re not hunting around for separate parts that may or may not match.
In the box you get a 1 metre 8mm hose, a Patio Gas clip-on regulator, a 5/8″ UNF fitting and a 1/4″ LH BBQ fitting. Between them, these cover the common connections found on gas barbecues, which is what makes the kit universal.
It pairs with Calor Patio Gas bottles like the 5kg and 13kg. Check the fittings suit your BBQ before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This Calor propane 37mbar 2 cylinder automatic changeover valve is the heart of a two-bottle propane system. It connects two cylinders and switches automatically from the empty bottle to the full one, so your gas supply doesn’t run out mid-use. You just swap the spent cylinder for a fresh one when it’s convenient, without any break in supply.
It includes OPSO, an over-pressure shut-off built into the valve as a safety feature. It’s designed to run multiple-cylinder systems, and pigtails and upgrade kits connect to it to build the setup out to four cylinders.
This item must be fitted by a Gas Safe registered engineer. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
