30″ Propane Gas Pigtail POL x W20
£16.00
This 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the longer of our standard pigtails, useful where the cylinder sits a bit further from the regulator. It’s the high pressure link between the bottle and the rest of your gas setup, common on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
9 in stock
Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.
You may also like…
A pigtail is the short high pressure hose that links a gas cylinder to a regulator or changeover valve, and this 30 inch propane gas pigtail does that job with a POL inlet and a W20 outlet. The extra length over the 20 inch version helps where the cylinder stands a little further from the regulator or changeover valve.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst pressure, built for the cylinder side of the system rather than the low pressure appliance side. It comes fitted with a full non-return and excess flow valve, designed to cut the gas flow if there’s a sudden loss of pressure downstream, and every hose carries a self-adhesive advisory label.
On a two or four cylinder setup, pigtails like this one connect each bottle to the changeover valve and upgrade kits, and an armoured version is available where vermin or wear are a concern.
Pigtails should be fitted and inspected by a competent person, following Calor’s own guidance rather than anything improvised. We deliver across our defined postcode area around Reading, so check your postcode is covered before ordering, or call the yard on 0118 9242888 if you’d like help matching the right fitting.
FAQs
What does a propane gas pigtail do?
A pigtail is the short high pressure hose that connects a propane cylinder to a regulator or changeover valve. This 30 inch version has a POL inlet and a W20 outlet, and the extra length helps when the cylinder sits further from the regulator on a multi-cylinder system.
What’s the difference between the 20″ and 30″ pigtail?
They’re the same fitting and pressure rating. The difference is length. The 30 inch pigtail gives more reach where the cylinder is further from the regulator or changeover valve. Pick the length that lets the hose run without strain or being pulled tight.
What pressure is this pigtail rated to?
It’s a high pressure hose rated to 30 bar working pressure and 90 bar burst pressure, fitted with a full non-return and excess flow valve to shut off the flow if pressure is lost downstream. Every hose carries a self-adhesive advisory label.
You must be logged in to post a review.
Reviews
There are no reviews yet.