These contact tips are a consumable for MIG welding torches, supplied 10 to a pack. The contact tip is the small part at the end of the torch that the welding wire passes through, carrying the current to the wire as it feeds.
Contact tips wear with use and need replacing now and then to keep a clean, steady arc, so it’s worth keeping a spare pack to hand. These come 10 tips per pouch.
Check the tip size and type match your torch and wire before fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
Select options
This product has multiple variants. The options may be chosen on the product page
This argon mix welding gas regulator is a single-stage, dual-gauge regulator made for Hobbyweld gas cylinders. The two gauges let you read both the gas remaining in the cylinder and the flow you’re setting at the torch, so you can keep your shielding gas steady while you weld.
The gauges are custom units reading up to 137 bar, which matches the Original Hobbyweld cylinders. It’s built for the argon-based MIG shielding gas mixes like Hobbyweld 5 and 15, regulating the gas down to a usable working flow.
Make sure the regulator suits your cylinder and welding setup before use, and follow Hobbyweld’s guidance on fitting compressed-gas equipment. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This oxygen regulator is a single-stage, dual-gauge regulator for Hobbyweld oxygen cylinders, used in oxy-acetylene cutting and welding. The two gauges let you read both the gas remaining in the cylinder and the working pressure you’re setting at the torch.
The custom gauges read up to 137 bar, which matches the Original Hobbyweld cylinders. It’s the part that controls your oxygen supply, paired with acetylene in an oxy-acetylene set.
Compressed-gas regulators should be fitted and used carefully, following Hobbyweld’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This variable shade welding helmet is a solid, well-built helmet for anyone doing their own welding. The variable shade lens adjusts to the brightness of the arc, so it darkens to protect your eyes when you strike up and clears again when you stop, which means one helmet covers different jobs without swapping lenses.
The build is the reassuring part. It’s a thick, durable construction made to take the knocks of a workshop, with internal sensitivity and delay controls so you can fine-tune how quickly and how strongly the lens reacts to suit the work you’re doing. The lens sits recessed for protection, and it’s backed by a 2-year warranty on the lens.
It’s a natural partner to the Hobbyweld welding gas range, completing the kit for TIG, MIG or gas work. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
