Argon Mix Regulator

This argon mix welding gas regulator is a single-stage, dual-gauge regulator designed for Hobbyweld gas cylinders. It’s the part that controls your shielding gas: one gauge shows roughly how much gas is left in the cylinder, the other shows the working pressure or flow you’ve set, so you can run a steady weld without guessing.

The gauges are custom units reading up to 137 bar, which lines up with the Original Hobbyweld cylinders. It’s intended for the argon-based MIG mixes such as Hobbyweld 5 and Hobbyweld 15, stepping the high cylinder pressure down to the flow your torch needs.

Compressed-gas regulators should be fitted and used carefully, with the right fitting for your cylinder, following Hobbyweld’s own guidance rather than anything improvised. If your cylinder is a different capacity or pressure, check the regulator suits it before ordering.

We deliver across our defined postcode area around Reading, so check your postcode is covered before ordering, or call the yard on 0118 9242888 if you’d like help matching the regulator to your gas.

FAQs

What cylinders does the argon mix regulator fit?

It’s made for Hobbyweld gas cylinders, with custom gauges reading up to 137 bar to match the Original range. It suits the argon-based MIG mixes like Hobbyweld 5 and 15. Check it matches your cylinder’s pressure and fitting before use.

What do the two gauges show?

It’s a dual-gauge regulator. One gauge gives a rough read of the gas left in the cylinder, the other shows the working pressure or flow you’ve set at the torch. Together they help you keep your shielding gas steady while welding.

Do you deliver welding gear to my area?

We deliver across a defined set of postcodes around Reading, Berkshire and into parts of South Oxfordshire and Buckinghamshire. The area is limited, so check your postcode is covered first, or call the yard on 0118 9242888 to confirm.