Hobbyweld
Hobbyweld Oxygen (Original)
From: £55.00
The Hobbyweld Oxygen Original cylinder is 100% oxygen for cutting, welding, brazing and soldering. Used with a fuel gas such as propane, acetylene or propylene, it supports combustion and lets the flame run far hotter than it could on air alone, which is what makes gas cutting and welding possible.
Purity matters here more than people expect. Even a 1% drop in purity can push oxygen consumption up by 20% or more, so Hobbyweld fills these cylinders from a bulk tank to keep purity high and your gas use efficient.
Pair it with a Hobbyweld acetylene cylinder and you’ve got a compact, portable gas welding kit. This is the Original size, 9 litres water capacity at 137 bar. In line with the Acetylene Safety Regulations 2014, flash-back arrestors must be fitted with oxygen and fuel gas equipment. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
Please note that if you cannot exchange an empty cylinder on a like-for-like basis then you must purchase a cylinder deposit.
Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.
The Hobbyweld Oxygen Original cylinder is 100% oxygen, used alongside a fuel gas for cutting, welding, brazing and soldering. Oxygen supports combustion, and combining it with propane, acetylene or propylene produces a far higher flame temperature than burning the fuel gas in air. That extra heat is what lets you cut through steel and braze or weld cleanly.
There’s a practical reason to care about purity. Even a 1% reduction can increase oxygen consumption by 20% or more, so you’d burn through gas faster for no benefit. Hobbyweld fills its oxygen cylinders from a bulk tank to keep purity at its best, which keeps your gas use efficient and your results consistent.
This is the Original size, 9 litres water capacity at 137 bar. Combine it with a Hobbyweld acetylene cylinder and you have a compact, portable kit for gas welding and cutting.
One safety point carried straight from the maker: in line with the Acetylene Safety Regulations 2014, flash-back arrestors must be used with oxygen and fuel gas equipment. We deliver across our defined postcode area around Reading. Check your postcode is covered before ordering, or call the yard on 0118 9242888 to talk through the kit you need.
FAQs
What is the oxygen used for?
It’s 100% oxygen for cutting, welding, brazing and soldering, used with a fuel gas such as propane, acetylene or propylene. The oxygen supports combustion and produces a much hotter flame than air alone, which is what makes cutting and gas welding possible.
Why does oxygen purity matter?
Even a 1% drop in purity can push oxygen consumption up by 20% or more. Hobbyweld fills these cylinders from a bulk tank to keep purity high, so your gas lasts longer and your flame stays consistent.
Do I need flash-back arrestors?
Yes. In line with the Acetylene Safety Regulations 2014, flash-back arrestors must be fitted with oxygen and fuel gas equipment. For the full kit, pair it with a Hobbyweld acetylene cylinder, or call the yard on 0118 9242888.
| Manufacturer |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.