3 m 4.8 mm high Pressure Hose and Two Jubilee Clips
£15.95
This is a 3 metre length of 4.8mm high pressure gas hose, supplied with two jubilee clips to secure each end. The narrow 4.8mm bore is made for high pressure use with small gas appliances, where a low pressure hose isn’t the right choice.
High pressure hose is rated for the higher pressures found closer to the cylinder, so it suits small appliances and torches that need it. The supplied jubilee clips clamp each end firmly onto the hose tails for a secure fit. It’s important to match the hose to your appliance and connection, so check what yours needs before fitting.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
Out of stock
Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.
This 3 metre length of 4.8mm high pressure gas hose comes complete with two jubilee clips, ready for high pressure use with small gas appliances. The narrow 4.8mm bore marks it out from the wider low pressure hose, and the two are not interchangeable.
High pressure hose is built for the higher pressures found on the cylinder side of a gas system, which is why it suits small appliances and torches that run at those pressures. Each end pushes onto the hose tail and the supplied jubilee clips clamp it tight for a secure connection. As with any gas hose, it pays to check it for cracks or hardening over time and replace it when needed.
The key thing is matching the hose to the job. If your appliance needs low pressure hose downstream of a regulator, this isn’t the right part, so check before you fit it, and follow Calor’s guidance if you’re unsure. We deliver across our defined postcode area around Reading, so check your postcode is covered before ordering, or call the yard on 0118 9242888.
FAQs
What’s the difference between high and low pressure hose?
High pressure hose, like this 4.8mm one, is rated for the higher pressures near the cylinder and suits small appliances and torches. Low pressure hose, usually 8mm, runs downstream of a regulator to the appliance. They aren’t interchangeable, so match the hose to your setup.
How long is the hose and what’s included?
It’s a 3 metre length of 4.8mm high pressure gas hose, supplied with two jubilee clips, one for each end. That covers a typical connection with a bit of room to route the hose. If you need a different length or bore, check the fitting before ordering.
What appliances is this hose for?
It’s intended for small gas appliances that need a high pressure hose, such as certain torches and burners. If you’re not sure whether your appliance takes high or low pressure hose, check its specification or call the yard on 0118 9242888 before ordering.
You must be logged in to post a review.
Reviews
There are no reviews yet.