3/4 Jubilee Hose Clip
£1.95
This is a single 3/4 jubilee hose clip, the worm-drive clamp that secures a gas hose onto a hose tail. It’s the everyday fixing for low pressure gas connections on heaters, cookers and BBQs, holding the hose firmly so the joint stays tight.
It’s commonly used with the low pressure gas hose that connects an LPG appliance to its regulator. Tighten it with a screwdriver until the hose is held snug, and check it from time to time as part of looking after your gas connections.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand with the right parts.
97 in stock
Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.
This 3/4 jubilee hose clip is a single worm-drive clamp for securing gas hose onto a hose tail. It’s the small, everyday fixing behind a safe low pressure gas connection, the sort used on portable heaters, gas cookers and barbecues.
A jubilee clip works by tightening a threaded band around the hose with a screwdriver, pulling the hose firmly onto the tail so the joint can’t work loose. This 3/4 size pairs with the low pressure gas hose that runs between an LPG appliance and its regulator. It’s worth keeping a spare or two, since clips can corrode or lose their grip over time and are cheap to replace.
Always make sure the clip suits your hose and that the connection is sound before use, following Calor’s guidance. We deliver across our defined postcode area around Reading, so check your postcode is covered before ordering, or call the yard on 0118 9242888 if you’d like help with the right parts.
FAQs
What is a 3/4 jubilee hose clip used for?
It’s a worm-drive clamp that secures gas hose onto a hose tail, keeping a low pressure connection tight on heaters, cookers and BBQs. It pairs with the low pressure gas hose between an appliance and its regulator. Tighten it with a screwdriver until the hose is held firmly.
How many clips come in the pack?
This is a single 3/4 jubilee hose clip. A length of gas hose usually needs one at each end, so it’s worth ordering enough for both connections, plus a spare. If you’re not sure how many you need, give us a call before ordering.
Do you deliver hose clips to my area?
We deliver across a defined set of postcodes around Reading, Berkshire and into parts of South Oxfordshire and Buckinghamshire. The area is limited, so check your postcode is covered first, or call the yard on 0118 9242888 to confirm.
You must be logged in to post a review.
Reviews
There are no reviews yet.