Stainless Steel Patio Heater

£189.00

This stainless steel patio heater is a freestanding gas heater for extending evenings outdoors, the familiar tall, mushroom-style heater that warms a patio or seating area well into the cooler months. The stainless steel build is the practical bit. It stands up to being left outside far better than a painted finish.

It puts out up to 48,000 BTU, around 11 to 13.5 kW, which is plenty of warmth for a typical patio or garden table. Assembled, it stands 2,285mm tall, so the heat radiates down and out across the space below it rather than being aimed at one spot.

One thing to plan for: the 2-metre gas hose with jubilee clips and the 27mm regulator are not included and need to be bought separately, along with a propane cylinder to run it. We can help you sort the gas and fittings to go with it. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.

2 in stock

SKU: PH-2 Categories: ,

Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.

You may also like…

  • 2 m 8 mm Low Pressure Hose and Two Jubilee Clips

    £10.95
    Add to basketLoading Done
  • 13kg Patio Propane Gas

    From: £62.00
    Select optionsLoading Done
  • 27 mm Clip on Patio Regulator

    £16.00
    Add to basketLoading Done

This stainless steel patio heater is the freestanding gas heater that turns a chilly patio back into somewhere you actually want to sit. It’s the tall mushroom-style design that radiates warmth down and out across a seating area, and the stainless steel construction is a sensible choice for something that lives outdoors, holding up to the weather better than a painted heater would.

On output, it runs up to a maximum of 48,000 BTU, which is roughly 11 to 13.5 kW. That’s a strong, genuinely useful amount of heat for a patio table, a group of chairs or a corner of the garden, enough to take the edge off an autumn evening rather than just looking the part. Assembled, it stands 2,285mm tall, the right height for the heat to spread across the people sitting below.

The one thing to budget for is the gas connection. The 2-metre gas hose with jubilee clips and the 27mm regulator are not supplied with the heater and need to be purchased separately, and you’ll need a propane cylinder to fuel it. It’s worth sorting those at the same time so you can use the heater straight away, and we can point you to the right gas and fittings. We deliver across our defined postcode area around Reading. Check your postcode is covered before ordering, or call the yard on 0118 9242888.

FAQs

How much heat does it give out?

It puts out up to 48,000 BTU, around 11 to 13.5 kW, which is plenty of warmth for a typical patio table or seating area. At 2,285mm tall when assembled, the heat radiates down and out across the space below it.

Does it come with everything I need to run it?

Not quite. The 2-metre gas hose with jubilee clips and the 27mm regulator are sold separately, and you’ll need a propane cylinder to fuel it. It’s worth buying those together so you’re ready to go. Call the yard on 0118 9242888 and we’ll help you sort the gas and fittings.

Is it suitable for being left outside?

It’s built from stainless steel, which copes with outdoor conditions better than a painted finish. As with any gas appliance, follow the maker’s instructions for use and storage. Call the yard on 0118 9242888 if you have any questions.

Reviews

There are no reviews yet.

Be the first to review “Stainless Steel Patio Heater”