30″ 750mm Butane Nut x W20
£20.95
This is a 30 inch high pressure butane gas hose with a W20 nut, made to fit the Calor 4.5kg butane bottle. It’s the high pressure black hose that runs from the cylinder, the piece you need to connect a 4.5kg butane bottle into your setup.
Because it’s high pressure hose for the cylinder side, it’s matched to the butane bottle’s connection rather than to a low pressure appliance hose. If you’re connecting a 4.5kg butane cylinder, this is the hose and nut combination that fits it.
Check the fitting suits your cylinder and appliance before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
3 in stock
Please remember to check if we deliver to your area before adding products to the cart! All our deliveries are limited to the area around Reading. In order for us to make a delivery, your delivery address must be one of the Post Code areas.
This 30 inch high pressure butane gas hose comes with a W20 nut and is made to fit the Calor 4.5kg butane bottle. It’s a black high pressure hose for the cylinder side of the system, so it connects the 4.5kg butane cylinder into your gas setup rather than running between a regulator and an appliance.
The W20 nut matches the butane bottle’s connection, which is what makes this the right hose for the 4.5kg cylinder specifically. If your bottle or appliance uses a different fitting, this won’t be the part you need, so it’s worth checking the connection before you order.
As with any gas hose, it should be fitted correctly, kept in good condition, and replaced if it perishes or hardens over time. Fitting is best done by a competent person following Calor’s guidance rather than guessed at.
We deliver across our defined postcode area around Reading, so check your postcode is covered before ordering, or call the yard on 0118 9242888 and we’ll help you match the right hose and fitting to your bottle.
FAQs
What bottle does this butane hose fit?
It’s made to fit the Calor 4.5kg butane bottle. The 30 inch high pressure hose has a W20 nut that matches that cylinder’s connection. If you have a different butane or propane bottle, check the fitting first, as it may need a different hose.
Is this a high or low pressure hose?
It’s a high pressure hose for the cylinder side of the system, not a low pressure appliance hose. High and low pressure hose aren’t interchangeable, so match the hose to where it connects. If you’re unsure which you need, call the yard on 0118 9242888.
Do you deliver gas hose to my area?
We deliver across a defined set of postcodes around Reading, Berkshire and into parts of South Oxfordshire and Buckinghamshire. The area is limited, so check your postcode is covered first, or call the yard on 0118 9242888 to confirm before you order.
You must be logged in to post a review.
Reviews
There are no reviews yet.