This is a single 3/4 jubilee hose clip, the worm-drive clamp that secures a gas hose onto a hose tail. It’s the everyday fixing for low pressure gas connections on heaters, cookers and BBQs, holding the hose firmly so the joint stays tight.
It’s commonly used with the low pressure gas hose that connects an LPG appliance to its regulator. Tighten it with a screwdriver until the hose is held snug, and check it from time to time as part of looking after your gas connections.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand with the right parts.
This armoured 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W30 outlet. It’s the longer armoured pigtail, useful where the cylinder sits further from the regulator and you still want the extra protection.
The armoured outer layer guards the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors. It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve, and every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This armoured 20 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W20 outlet. The armoured outer layer is the difference: it protects the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the longer of our standard pigtails, useful where the cylinder sits a bit further from the regulator. It’s the high pressure link between the bottle and the rest of your gas setup, common on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
This 20 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the high pressure link between the bottle and the rest of your gas setup, and it’s commonly used on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
This brass tee piece is a POL to POL extended tee adaptor for propane gas bottles. It gives you a branched connection in solid brass, the kind used to join propane cylinders or add a second take-off into a propane system.
Both ends use the standard propane POL fitting, so it connects into pigtails, hoses and other POL-fitted gas parts. The extended brass body is hard-wearing and made for the cylinder side of a propane setup.
Gas connections like this should be fitted and leak-checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure it’s the part you need.
This is a 50 metre length of 8mm low pressure gas hose, for LPG use only. It’s the full-reel option, suited to longer runs and installations where a short hose won’t reach, or where you’re cutting hose to length for several connections.
The 8mm bore is the standard size for low pressure work downstream of a regulator. Being a long continuous length, it lets you run gas a fair distance or stock up for multiple jobs. As with any gas hose, it should be fitted, clipped and checked properly, and used only with LPG.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand working out what length you need.
This 500ml gas leak detection fluid is a quick, simple way to find air and gas leaks on fittings, hoses and connections. You brush it onto the joint, and if gas is escaping it bubbles up at the leak, so you can see exactly where the problem is.
Catching a leak early matters. A loose or failing connection can be costly and, with gas, potentially dangerous, and this fluid takes the guesswork out of checking a joint. It’s a handy thing to keep with any LPG setup, from a BBQ to a cylinder changeover.
If you ever suspect a leak, turn off the gas and follow Calor’s guidance or speak to a Gas Safe engineer. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This lightweight gas spanner is the budget-friendly tool for connecting and tightening propane and butane gas regulators and hose assemblies. It does the same job as the heavyweight version in a lighter, lower-cost form, fitting the nuts on standard gas fittings so you can make a secure connection.
It suits both propane and butane fittings, so one spanner covers most LPG jobs around the home, caravan or BBQ. It’s a handy thing to keep with your gas kit, especially if you swap cylinders now and then.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This heavyweight gas spanner is the tool for connecting and tightening propane and butane gas regulators and hose assemblies. It’s a sturdy, hard-wearing spanner sized for the nuts on standard gas fittings, so you can make a proper, secure connection rather than nipping it up by hand.
A snug connection matters on gas, and the right spanner makes that easy and repeatable. It suits both propane and butane fittings, so one tool covers most LPG jobs around the home, caravan or BBQ.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This Calor propane 37mbar 2 cylinder automatic changeover valve is the heart of a two-bottle propane system. It connects two cylinders and switches automatically from the empty bottle to the full one, so your gas supply doesn’t run out mid-use. You just swap the spent cylinder for a fresh one when it’s convenient, without any break in supply.
It includes OPSO, an over-pressure shut-off built into the valve as a safety feature. It’s designed to run multiple-cylinder systems, and pigtails and upgrade kits connect to it to build the setup out to four cylinders.
This item must be fitted by a Gas Safe registered engineer. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This is a 2 metre length of 8mm low pressure gas hose, supplied with two jubilee clips to secure each end. It’s the everyday hose for connecting an LPG appliance to its regulator, the kind of job that comes up on heaters, cookers and BBQs.
The 8mm bore suits low pressure butane and propane setups running off a clip-on or screw-on regulator. The jubilee clips clamp the hose firmly onto the hose tails for a secure fit. For anything other than low pressure use, you’ll want a different hose, so check your appliance and regulator first.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
The Calor Universal BBQ Hose Kit has everything you need to connect a gas BBQ to a Patio Gas bottle and get cooking. It’s a complete kit, so you’re not hunting around for separate parts that may or may not match.
In the box you get a 1 metre 8mm hose, a Patio Gas clip-on regulator, a 5/8″ UNF fitting and a 1/4″ LH BBQ fitting. Between them, these cover the common connections found on gas barbecues, which is what makes the kit universal.
It pairs with Calor Patio Gas bottles like the 5kg and 13kg. Check the fittings suit your BBQ before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This 21mm clip-on butane regulator is the standard fitting for portable butane heaters. It clips straight onto a 21mm valve by hand, with no tools, and an on/off lever lets you see at a glance whether the gas is open or shut.
It’s a low pressure regulator, so it sits between a butane cylinder and the heater and brings the gas down to the working pressure the appliance needs. It’s the right match for Calor butane bottles used with portable heaters, such as the 7kg and 15kg.
Always check the regulator suits your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure what you need.
This 27mm clip-on patio gas regulator is the standard fitting for Calor Patio Gas bottles. Part of the Calor Essentials range, it clips onto the 27mm valve by hand and has an easy on/off lever, so you can see whether the gas is open or shut.
The 27mm clip-on connection is what most modern gas BBQs and patio heaters use, so it’s the regulator to reach for when you’re setting up Patio Gas for outdoor cooking or heating. It brings the propane down to the working pressure your appliance needs.
Check the 27mm fitting matches your bottle and appliance before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This 29mbar screw-on butane regulator is the low pressure regulator made for the Calor 4.5kg butane cylinder. Part of the Calor Essentials range, it screws onto the cylinder valve and brings the butane down to the working pressure your appliance needs.
It’s the screw-on type, so it suits the 4.5kg butane bottle rather than the larger butane cylinders that take a 21mm clip-on regulator. If you’re running a small butane appliance off a 4.5kg bottle, this is usually the fitting you need.
Check the regulator matches your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which regulator suits your setup.
