This brass tee piece is a POL to POL extended tee adaptor for propane gas bottles. It gives you a branched connection in solid brass, the kind used to join propane cylinders or add a second take-off into a propane system.
Both ends use the standard propane POL fitting, so it connects into pigtails, hoses and other POL-fitted gas parts. The extended brass body is hard-wearing and made for the cylinder side of a propane setup.
Gas connections like this should be fitted and leak-checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure it’s the part you need.
This is a 50 metre length of 8mm low pressure gas hose, for LPG use only. It’s the full-reel option, suited to longer runs and installations where a short hose won’t reach, or where you’re cutting hose to length for several connections.
The 8mm bore is the standard size for low pressure work downstream of a regulator. Being a long continuous length, it lets you run gas a fair distance or stock up for multiple jobs. As with any gas hose, it should be fitted, clipped and checked properly, and used only with LPG.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand working out what length you need.
These contact tips are a consumable for MIG welding torches, supplied 10 to a pack. The contact tip is the small part at the end of the torch that the welding wire passes through, carrying the current to the wire as it feeds.
Contact tips wear with use and need replacing now and then to keep a clean, steady arc, so it’s worth keeping a spare pack to hand. These come 10 tips per pouch.
Check the tip size and type match your torch and wire before fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
Select options
This product has multiple variants. The options may be chosen on the product page
This 500ml gas leak detection fluid is a quick, simple way to find air and gas leaks on fittings, hoses and connections. You brush it onto the joint, and if gas is escaping it bubbles up at the leak, so you can see exactly where the problem is.
Catching a leak early matters. A loose or failing connection can be costly and, with gas, potentially dangerous, and this fluid takes the guesswork out of checking a joint. It’s a handy thing to keep with any LPG setup, from a BBQ to a cylinder changeover.
If you ever suspect a leak, turn off the gas and follow Calor’s guidance or speak to a Gas Safe engineer. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This heavyweight gas spanner is the tool for connecting and tightening propane and butane gas regulators and hose assemblies. It’s a sturdy, hard-wearing spanner sized for the nuts on standard gas fittings, so you can make a proper, secure connection rather than nipping it up by hand.
A snug connection matters on gas, and the right spanner makes that easy and repeatable. It suits both propane and butane fittings, so one tool covers most LPG jobs around the home, caravan or BBQ.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This lightweight gas spanner is the budget-friendly tool for connecting and tightening propane and butane gas regulators and hose assemblies. It does the same job as the heavyweight version in a lighter, lower-cost form, fitting the nuts on standard gas fittings so you can make a secure connection.
It suits both propane and butane fittings, so one spanner covers most LPG jobs around the home, caravan or BBQ. It’s a handy thing to keep with your gas kit, especially if you swap cylinders now and then.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This argon mix welding gas regulator is a single-stage, dual-gauge regulator made for Hobbyweld gas cylinders. The two gauges let you read both the gas remaining in the cylinder and the flow you’re setting at the torch, so you can keep your shielding gas steady while you weld.
The gauges are custom units reading up to 137 bar, which matches the Original Hobbyweld cylinders. It’s built for the argon-based MIG shielding gas mixes like Hobbyweld 5 and 15, regulating the gas down to a usable working flow.
Make sure the regulator suits your cylinder and welding setup before use, and follow Hobbyweld’s guidance on fitting compressed-gas equipment. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This oxygen regulator is a single-stage, dual-gauge regulator for Hobbyweld oxygen cylinders, used in oxy-acetylene cutting and welding. The two gauges let you read both the gas remaining in the cylinder and the working pressure you’re setting at the torch.
The custom gauges read up to 137 bar, which matches the Original Hobbyweld cylinders. It’s the part that controls your oxygen supply, paired with acetylene in an oxy-acetylene set.
Compressed-gas regulators should be fitted and used carefully, following Hobbyweld’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This variable shade welding helmet is a solid, well-built helmet for anyone doing their own welding. The variable shade lens adjusts to the brightness of the arc, so it darkens to protect your eyes when you strike up and clears again when you stop, which means one helmet covers different jobs without swapping lenses.
The build is the reassuring part. It’s a thick, durable construction made to take the knocks of a workshop, with internal sensitivity and delay controls so you can fine-tune how quickly and how strongly the lens reacts to suit the work you’re doing. The lens sits recessed for protection, and it’s backed by a 2-year warranty on the lens.
It’s a natural partner to the Hobbyweld welding gas range, completing the kit for TIG, MIG or gas work. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
