We supply a wide range of bottled gas. From camping gas to off-mains central heating; CO2 for fizzy drinks to helium for balloons and welding gas for hobbyists, Harringtons has your needs covered.
For just £5 (inc vat @ 20%) we’ll deliver to anywhere in our delivery area.
The Pub Gas CO2 6.35kg cylinder is the larger food-grade CO2 cylinder for dispensing drinks. It suits home brewers and low-usage customers who need more capacity for dispensing soft drinks, and the same food-grade CO2 can also be used to add CO2 to a tropical aquarium, where it helps keep plants healthy.
Being the bigger of the two sizes, it means fewer refills if you get through a fair amount of gas. One thing to know on refills: we can only exchange Harringtons drinks cylinders, so we’re not able to accept other brands for swap.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This Harringtons drinks dispensing cylinder is a 60/40 mix, 60% CO2 to 40% nitrogen, blended for dispensing lagers and for soda machines. It’s a 10-litre bottle, sized for home brewers and low-usage customers rather than a busy commercial cellar, so it’s a practical choice if you dispense at home or keep a small setup running.
The mix is the part that matters: the higher CO2 proportion suits lagers and carbonated drinks, where you want the carbonation kept up as you pour. For ales and stouts, the 70/30 mix is the one to choose instead.
One thing to know on refills: we can only exchange Harringtons cylinders, so we’re not able to accept other brands for swap. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This Harringtons drinks dispensing cylinder is a 70/30 mix, 70% nitrogen to 30% CO2, blended for dispensing ales, stouts and similar drinks. It’s a 10-litre bottle aimed at home brewers and low-usage customers, so it suits a home or hobby setup rather than a busy commercial cellar.
The blend is the key. Ales and stouts want a lower CO2 proportion than lagers, and the higher nitrogen content gives that smooth, creamy pour you associate with a well-kept ale or a nitro stout. If you’re dispensing lagers or running a soda machine, the 60/40 mix is the one for those instead.
One thing to know on refills: we can only exchange Harringtons cylinders, so we’re not able to accept other brands for swap. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This 21mm clip-on butane regulator is the standard fitting for portable butane heaters. It clips straight onto a 21mm valve by hand, with no tools, and an on/off lever lets you see at a glance whether the gas is open or shut.
It’s a low pressure regulator, so it sits between a butane cylinder and the heater and brings the gas down to the working pressure the appliance needs. It’s the right match for Calor butane bottles used with portable heaters, such as the 7kg and 15kg.
Always check the regulator suits your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure what you need.
This 27mm clip-on patio gas regulator is the standard fitting for Calor Patio Gas bottles. Part of the Calor Essentials range, it clips onto the 27mm valve by hand and has an easy on/off lever, so you can see whether the gas is open or shut.
The 27mm clip-on connection is what most modern gas BBQs and patio heaters use, so it’s the regulator to reach for when you’re setting up Patio Gas for outdoor cooking or heating. It brings the propane down to the working pressure your appliance needs.
Check the 27mm fitting matches your bottle and appliance before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This 29mbar screw-on butane regulator is the low pressure regulator made for the Calor 4.5kg butane cylinder. Part of the Calor Essentials range, it screws onto the cylinder valve and brings the butane down to the working pressure your appliance needs.
It’s the screw-on type, so it suits the 4.5kg butane bottle rather than the larger butane cylinders that take a 21mm clip-on regulator. If you’re running a small butane appliance off a 4.5kg bottle, this is usually the fitting you need.
Check the regulator matches your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which regulator suits your setup.
This 37mbar screw-on propane regulator is the standard low pressure regulator for Calor propane cylinders. Part of the Calor Essentials range, it has a standard propane POL connection and works in both domestic and industrial setups, bringing the propane down to the working pressure your appliance needs.
It’s the regulator to pair with the common Calor propane bottles. The 3.9kg, 6kg, 13kg, 19kg and 47kg cylinders all take this 37mbar screw-on fitting, so if you’re running a propane appliance off one of those bottles, this is usually the regulator you need.
Check the regulator suits your cylinder valve and appliance before use, and follow Calor’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure what you need.
This Campingaz butane regulator is the brand-specific regulator for Campingaz cylinders. It fits the 901, 904 and 907 bottles, and you need it to connect any of those cylinders to your camping stove, lantern or appliance.
A standard butane regulator won’t fit Campingaz cylinders, which is why the brand-specific part is needed. If you’ve a Campingaz 904 or 907 and no regulator, this is the one to add.
Check it suits your cylinder and appliance before use, and follow Campingaz’s guidance on fitting. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This is a 2 metre length of 8mm low pressure gas hose, supplied with two jubilee clips to secure each end. It’s the everyday hose for connecting an LPG appliance to its regulator, the kind of job that comes up on heaters, cookers and BBQs.
The 8mm bore suits low pressure butane and propane setups running off a clip-on or screw-on regulator. The jubilee clips clamp the hose firmly onto the hose tails for a secure fit. For anything other than low pressure use, you’ll want a different hose, so check your appliance and regulator first.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
This 20 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the high pressure link between the bottle and the rest of your gas setup, and it’s commonly used on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
This is a 3 metre length of 4.8mm high pressure gas hose, supplied with two jubilee clips to secure each end. The narrow 4.8mm bore is made for high pressure use with small gas appliances, where a low pressure hose isn’t the right choice.
High pressure hose is rated for the higher pressures found closer to the cylinder, so it suits small appliances and torches that need it. The supplied jubilee clips clamp each end firmly onto the hose tails for a secure fit. It’s important to match the hose to your appliance and connection, so check what yours needs before fitting.
We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
This is a 30 inch high pressure butane gas hose with a W20 nut, made to fit the Calor 4.5kg butane bottle. It’s the high pressure black hose that runs from the cylinder, the piece you need to connect a 4.5kg butane bottle into your setup.
Because it’s high pressure hose for the cylinder side, it’s matched to the butane bottle’s connection rather than to a low pressure appliance hose. If you’re connecting a 4.5kg butane cylinder, this is the hose and nut combination that fits it.
Check the fitting suits your cylinder and appliance before use, and follow Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you’re not sure which hose you need.
This 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, using a POL inlet and a W20 outlet. It’s the longer of our standard pigtails, useful where the cylinder sits a bit further from the regulator. It’s the high pressure link between the bottle and the rest of your gas setup, common on multi-cylinder and automatic changeover installations.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by someone competent, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 if you need a hand matching the fitting.
This armoured 20 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W20 outlet. The armoured outer layer is the difference: it protects the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors.
It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve that helps shut off the flow if a fault occurs downstream. Every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This armoured 30 inch propane gas pigtail connects a propane cylinder into a regulator or changeover system, with a POL inlet and a W30 outlet. It’s the longer armoured pigtail, useful where the cylinder sits further from the regulator and you still want the extra protection.
The armoured outer layer guards the hose against general wear, sharp objects and vermin, and it’s squirrel proof, which matters where bottles sit outdoors. It’s a high pressure black hose rated to 30 bar working pressure and 90 bar burst, fitted with a full non-return and excess flow valve, and every hose carries a self-adhesive advisory label.
Pigtails should be fitted and checked by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888.
This Calor armoured LPG 4 cylinder upgrade kit turns a two-cylinder system into a four-cylinder one, so you’ve got more gas on hand and longer between changeovers. It’s built to work with the Calor LPG 2 cylinder automatic changeover kit with OPSO.
The hosing is armoured and squirrel proof, giving extra protection against general wear, sharp objects and vermin, which is worth having where cylinders sit outdoors.
A kit like this should be fitted by a competent person, following Calor’s guidance. We deliver across our defined Reading area, so check your postcode is covered, or call the yard on 0118 9242888 to check it suits your system.
